Samsung washer drains inconsistently for many users. The frustration of finding water in your Samsung front or top load washer drum after the wash cycle may spoil your day. Draining issues may range from clogged drains to mechanical failures. The reasons and solutions for Samsung’s poor draining are covered in this guide.
Typical Reasons a Samsung Washer Won’t Drain
Many issues may cause your Samsung washer to drain water improperly. Let’s explore the most common reasons to help you troubleshoot and find the problem.
Reason #1: Blocked pipes.
Blocked drains are a common reason of Samsung washers not emptying. Time may clog your washer’s drainpipe with lint, garbage, and other debris.
- Signs: A clogged drain is indicated by water remaining in the drum during a cycle, drainage error codes, or delayed draining.
- Solution: Disconnect the washer from electricity, identify the drainpipe, and use a plumbing snake or other tool to remove the clog.
Reason #2: Broken Drain Hose
Water from the washer enters your home’s plumbing via the drain line. Broken, twisted, or kinked hoses may impede water flow and cause drainage issues.
- Signs: The hose might seem crooked, choked with trash, or squeezed. Inside the drum, water could pool.
- Solution: Look over the hose for any obvious kinks or blockages. Should the hose be broken, replacement might be required. Make sure the hose is set up so that water may run freely without any abrupt bends.
Reason #3: Broken Pump Belt
Some types use the pump belt to spin the pump emptying the water. If the belt break or deteriorate, the pump will not run as it should and your washer won’t drain.
- Signs of a malfunctioning pump belt: The washers may not drain, and during the drainage cycle you could hear buzzing sounds.
- Solution: Remove the access panel at the washers’ bottom to examine the pump belt. Replace your belt with a new one should it be cracked or damaged.
Reason #4: Faulty Pump Motor
Your Samsung’s washer may not drain water if a pump motor is defective. The part running the water pump is the pump motor. If it fail, the washer won’t drain.
- Signs of a faulty pump motor: The washer does not drain; during the draining cycle, the pump may not be audible.
- Solution: A trained technician should repair the defective pump motor to restore the drainage capability of the washers.
Reason #5: Blocked Pump Filter
Before they get into the drain pump, the pump filter is meant to gather lint, coins, and other tiny things. If this filter choke, water may not drain as intended.
- Signs of a blocked pump filter: Slow draining, water left in the drum, or error symbols on the washer’ display indicate a clogged pump filter.
- Solution: At the front bottom of your Samsung washer sits the pump filter. You may remove it and clear any trash from it to restore correct water flow.
Reason #6: Damaged Door Switch
A safety precaution, the door switch prevents the washers from running while the door is open. If the door switch be broken or damaged, the washer might stop draining midway through a cycle.
- Signs of a damaged door switch: The washers cease emptying, and you could see a door related fault number.
- Solution: Utilizing a multimeter, test the door switch for continuity. Should it prove defective, the door switch must be replaced.
Reason #7: Faulty Timer Control
Including the drainage process, the timing control controls when the washers transitions from one cycle to another. Should the timer be broken, the washer could not transition to the draining cycle, therefore leaving water in the drum.
- Signs of a faulty timer control: The washers never enter the emptying phase; they stay caught in a cycle.
- Solution: If the timer be the reason of the drainage issue, a qualified expert will have to replace it.
How Would One Identify Problems with Drainage in a Samsung Washer?
Use these guidelines to precisely identify the reason your Samsung’s washer is not draining water:
- Look for fault codes: If a drainage problem exist, most Samsung washers will show an error code. Consult the Samsung website or the user manual to decipher the code and identify a fix.
- Look over the drum: At the cycle’s conclusion, find out if the drum still holds water. This point to a drainage issue.
- Check for odd sounds. If you hear a buzzing or grinding noise, the pump motor or pump belt might be the cause.
How Can One Fix a Not Draining Samsung Washing Machine?
You may start to address your washer’s drainage problem after you have found its source. Use these guidelines to fix the issue via troubleshooting.
Step #1: Check the Level
If your washer not be level, it might not drain as intended. With Samsung front load washers especially this is really typical.
Steps to check the level:
- To see whether the washer are balanced, place a level on top of them.
- If the washers be uneven, turn the feet to elevate or lower every corner.
- Verify the washer’ surface is level and sturdy.
Step #2: Inspect the Drain Hose
Examining the drain pipe should be your second step in looking at a Samsung washer not draining.
Steps to inspect the drain hose:
- To reach the hose, unplug the washers and slide them away from the wall.
- Look for hose kinks, bends, or clogs.
- Remove and clean the hose with water to free any obstruction should it be blocked.
- Replace a damaged hose with a new one.
Step #3: Clean the Pump Filter
Typical offenders for a Samsung top load washer not draining or a front load model include a clogged pump filter. Regular filter cleanings help to avoid drainage problems.
Steps to clean the pump filter:
- Turn off the washers then find the pump filter at the machine’s lower front.
- Under the filter, lay a towel or small container to collect any water.
- Opening the filter cover, clear any tiny items, lint, or trash.
- Before sealing the lid, rins the filter with running water and reinstall it firmly.
Conclusion
Samsungs may not drain because to a broken pump belt, plugged drains, hoses, or motor. Knowing the common reasons of Samsung’s poor draining will help you fix it.
If you need expert assistance with Samsung washers not draining, Toronto Appliances Repair can help. Our experienced technicians can fix any Samsung front or top load washer drainage problem. Our washer repair service is fast and reliable.
Do not let drainage issues disrupt your washing regimen. Contact us immediately for expert Samsung washer repairs!
REFERENCES
https://www.samsung.com/ca/support/home-appliances/samsung-washer-water-not-draining/