Technicians available now
Dryer Repair in Toronto
Electric and gas dryer repair — no heat, not tumbling, taking too long to dry or making noise.
- Same day service
- Warranty guaranteed
- $0 Diagnostic with Repair
- Repairs Starting at $99
Book your repair today
Leave your details — we call you back within 15 minutes.
Common dryer problems we fix
A dryer that runs but does not heat is most often a heating element, thermal fuse or gas igniter. Long drying times point to a blocked vent or a failing thermostat. Our technician tests the full heat circuit, belt, rollers and motor, repairs the fault and checks the exhaust for safety.
Dryer not heating
The drum turns but clothes stay cold or damp. On electric dryers it is the heating element, thermal fuse or thermostat; on gas dryers the igniter, flame sensor or gas valve coils. A clogged vent often causes it.
Not tumbling
If the drum will not turn, the drive belt has usually snapped or the idler pulley or motor has failed. We replace the belt and check the pulley and rollers.
Takes too long to dry
Needing two cycles to dry a load is most often a clogged vent, then a weak heating element or failing cycling thermostat. We clear the vent and test the heat circuit.
Squeaking or banging
Squealing or thumping while the drum turns is usually worn drum rollers, the idler pulley or a dry drum felt seal. We replace the noisy part before it damages the drum.
Burning smell
A burning smell is a warning sign: lint build-up in the vent or around the heater is a fire risk. Stop using the dryer and call us — we clean the vent and inspect the heating system.
Will not start
A dryer that will not start may have a faulty door switch, a blown thermal fuse, a failed start switch or a power problem at the cord or terminal block. We test each in order.
Dryer Repair Cost
Estimated labour for the most common jobs — tap a repair to see what it involves. Final price is confirmed before work begins, and the diagnostic is $0 when you repair with us.
$99–249
Heating Element Replacement (electric)$179–249
The drum turns but the clothes stay cold or damp. We test the element and replace it if it is burnt out.
Thermal Fuse Replacement (no heat / no start)$99–199
The dryer has no heat or will not start after overheating. We replace the blown fuse and find out what caused it.
Gas Valve Coils (gas dryer)$179–249
A gas dryer runs but does not heat. The faulty valve coils are replaced and the flame tested.
Gas Igniter Replacement$179–249
The glow bar lights weakly or not at all. We replace the igniter and test ignition.
Flame Sensor$99–199
The burner lights briefly then goes out. We replace the flame sensor.
Drive Belt Replacement$99–199
The drum does not turn or spins weakly while the motor runs. A worn or snapped belt is replaced and the drum alignment is checked.
Drum Rollers / Wheels (squeaking)$179–249
A squealing or rumbling noise as the drum turns. Worn rollers are replaced.
Idler Pulley Replacement$179–249
A loud squeal or thumping that starts when the dryer runs. The idler pulley is replaced.
Blower Wheel Clearing / Replacement$179–249
Long drying times with a rattling or scraping sound. We clear or replace the blower wheel.
Drive Motor Replacement$199–249
The dryer hums but does not turn or does not start. The drive motor is replaced.
Door Switch Assembly$99–199
The dryer will not start even though the door is closed. The door switch is replaced.
Moisture Sensor Bars$99–199
The dryer stops too early and clothes are still wet. We clean or replace the moisture sensor bars.
High-Limit Thermostat$99–199
The dryer overheats or shuts off with no heat. The thermostat is replaced.
Timer Mechanism$199–249
Cycles do not advance or the dryer will not stop. The timer is replaced.
Main Control Board$199–249
The dryer is unresponsive or shows error codes. We test and replace the control board.
Power Cord / Terminal Block Fix$99–199
The dryer is dead or the plug is hot and burnt. We replace the damaged cord or terminal block.
Drum Felt Seal Replacement$99–199
Squeaking and lint escaping around the drum. The worn felt seal is replaced.
Door Catch / Strike$99–200
The door will not stay closed. We replace the worn catch or strike.
Exhaust Vent Internal Clearing$99–199
Clothes take more than one cycle to dry and the dryer gets very hot. We clear lint from the internal vent path — a fire-safety fix.
Cycling Thermostat$99–199
The dryer overheats or does not get hot enough. The cycling thermostat is replaced.
Coupons & Special Offers
Mention a coupon when you call or book online — applies to any brand and appliance.
How it works
-
1
Call or book online
Tell us the appliance, brand and symptoms. We confirm a time window — same or next day.
-
2
Free diagnostic at your door
The technician finds the fault and gives you a fixed price. Approve it or decline — the $0 diagnostic applies when you repair.
-
3
Fixed on the spot
Most repairs finish in one visit with parts from the van, and every repair is covered by a warranty.
What You Get With Every Visit
A technician who arrives when promised, explains the fault plainly and fixes it properly.
Warranty on every repair
Parts and labour covered. If the same problem returns, we come back at no charge.
Experienced technicians
Trained, insured pros who repair every major brand, every day.
Upfront pricing
You approve a fixed price before we start. Average repair is under $300.
Parts on board
Vans stocked with common parts — most repairs are done in one visit.
What our customers say
We repair all major appliance brands
Every make and model — pick your brand.
Samsung
Whirlpool
LG
GE
Maytag
Frigidaire
Kenmore
Bosch
KitchenAid
Amana
Speed Queen Speed Queen
Electrolux
Haier
Hisense
Hotpoint
Inglis
Moffat
Admiral
Magic Chef
Danby
Insignia
Panasonic
White-Westinghouse
Sub-Zero
Wolf
Viking
Thermador
Jenn-Air
GE Profile
Dacor
Monogram
Café
Thor Kitchen
Marvel
BlueStar
Brigade
Cove
Garland
Forno
Beaumark
Frequently asked questions
How much does dryer repair cost in Toronto?
Most dryer repairs are $99–249. Thermal fuses, belts and sensors are $99–199; heating elements, igniters and rollers are $179–249.
Why is my dryer not heating?
On electric dryers it is typically the heating element, thermal fuse or high-limit thermostat. On gas dryers it is usually the igniter, gas valve coils or flame sensor.
Why does my dryer take so long to dry clothes?
A clogged vent is the number one cause, followed by a weak heating element or a failing cycling thermostat. We clear the exhaust and test the heat circuit.
Is a burning smell from the dryer dangerous?
It can be — lint build-up is a fire risk. Stop using the dryer and call us. We clean and inspect the vent as part of the repair.
How do I know if my dryer vent is clogged?
Clothes need more than one cycle, the dryer or the laundry room gets very hot, or the lint trap is clean but the outside vent flap barely opens. A clogged vent is both the top cause of slow drying and a fire risk, so we clear it as part of the repair.
My gas dryer runs but will not heat. What should I check?
Make sure the gas valve is open and the dryer is plugged in and on a working breaker. If it still does not heat, the igniter, flame sensor or gas valve coils are the usual culprits — all are quick repairs.
Neighbourhoods We Serve
Our technicians work all over the city, including:
- Bloor West Village
- Bloordale Village
- CityPlace
- Downtown
- Dufferin Grove
- Fort York
- Grange Park
- Harbord Village
- Harbourfront
- High Park
- Liberty Village
- Little Portugal
- Moss Park
- Parkdale
We're just minutes away.
Need appliance repair? Leave a request or call — a local technician can be at your door today.
- Fast responseSame-day service
- Local techniciansServing Toronto
- Upfront pricingNo hidden fees
- WarrantyOn parts & labour
Book your appliance repair
Fill out the form and we'll call you back with available times and a repair quote.